SLIO > Signal modules digital

022-1DF00 - Signal modules digital | Digital output modules

Order no.

022-1DF00

TypeSM 022
Module ID0113 2F48

General information

Note-
Features8 outputs
Output current 0.5 A
diagnosis of wiríng errors

Current consumption/power loss

Current consumption from backplane bus70 mA
Power loss1 W

Technical data digital outputs

Number of outputs8
Cable length, shielded1000 m
Cable length, unshielded600 m
Rated load voltageDC 20.4...28.8 V
Current consumption from load voltage L+ (without load)11 mA
Total current per group, horizontal configuration, 40°C4 A
Total current per group, horizontal configuration, 60°C4 A
Total current per group, vertical configuration4 A
Output current at signal "1", rated value0.5 A
Output delay of "0" to "1"max. 350 µs
Output delay of "1" to "0"max. 350 µs
Minimum load current-
Lamp load10 W
Parallel switching of outputs for redundant control of a loadnot possible
Parallel switching of outputs for increased powernot possible
Actuation of digital input
Switching frequency with resistive loadmax. 1000 Hz
Switching frequency with inductive loadmax. 0.5 Hz
Switching frequency on lamp loadmax. 10 Hz
Internal limitation of inductive shut-off voltageL+ (-52 V)
Short-circuit protection of outputyes, electronic
Trigger level1 A
Number of operating cycle of relay outputs-
Switching capacity of contacts-
Output data size8 Bit

Status information, alarms, diagnostics

Status displaygreen LED per channel
Interruptsyes, parameterizable
Process alarmno
Diagnostic interruptyes, parameterizable
Diagnostic functionsyes
Diagnostics information read-outpossible
Supply voltage displaygreen LED
Group error displayred SF LED
Channel error displaynone

Isolation

Between channels-
Between channels of groups to-
Between channels and backplane bus
Insulation tested withDC 500 V

PWM data

PWM channels-
PWM time basis-
Period length-
Minimum pulse width-
Type of output-

Safety

Safety protocol-
Safety requirements-
Secure user address-
Watchdog-
Two channels-
Test pulse length-
Circuit monitoring-

Datasizes

Input bytes0
Output bytes1
Parameter bytes7
Diagnostic bytes20

Housing

MaterialPPE / PPE GF10
MountingProfile rail 35 mm

Mechanical data

Dimensions (WxHxD)12.9 mm x 109 mm x 76.5 mm
Weight60 g

Environmental conditions

Operating temperature0 °C to 60 °C
Storage temperature-25 °C to 70 °C

Certifications

UL certificationin preparation
KC certificationyes

Downloads

[Datasheet]
[Manual]

[STP]