SLIO > Signal modules digital
022-1BB90 - Signal modules digital | Digital output modules
Order no. |
022-1BB90 |
| Type | SM 022 |
| Module ID | 0901 4880 |
General information |
|
| Note | - |
| Features | 2 outputs PWM |
Current consumption/power loss |
|
| Current consumption from backplane bus | 105 mA |
| Power loss | 0.95 W |
Technical data digital outputs |
|
| Number of outputs | 2 |
| Cable length, shielded | 1000 m |
| Cable length, unshielded | 600 m |
| Rated load voltage | DC 20.4...28.8 V |
| Current consumption from load voltage L+ (without load) | 15 mA |
| Total current per group, horizontal configuration, 40°C | 1 A |
| Total current per group, horizontal configuration, 60°C | 1 A |
| Total current per group, vertical configuration | 1 A |
| Output current at signal "1", rated value | 0.5 A |
| Output delay of "0" to "1" | max. 100 ns |
| Output delay of "1" to "0" | max. 100 ns |
| Minimum load current | - |
| Lamp load | 10 W |
| Parallel switching of outputs for redundant control of a load | not possible |
| Parallel switching of outputs for increased power | not possible |
| Actuation of digital input |  |
| Switching frequency with resistive load | max. 40 kHz |
| Switching frequency with inductive load | max. 40 kHz |
| Switching frequency on lamp load | max. 40 kHz |
| Internal limitation of inductive shut-off voltage | L+ (-52 V) |
| Short-circuit protection of output | yes, electronic, and only highside |
| Trigger level | 2.5 A |
| Number of operating cycle of relay outputs | - |
| Switching capacity of contacts | - |
| Output data size | 12 Byte |
Status information, alarms, diagnostics |
|
| Status display | green LED per channel |
| Interrupts | no |
| Process alarm | no |
| Diagnostic interrupt | no |
| Diagnostic functions | no |
| Diagnostics information read-out | possible |
| Supply voltage display | green LED |
| Group error display | red LED |
| Channel error display | none |
Isolation |
|
| Between channels | - |
| Between channels of groups to | - |
| Between channels and backplane bus | |
| Insulation tested with | DC 500 V |
PWM data |
|
| PWM channels | 2 |
| PWM time basis | 20.83ns |
| Period length | 1200...8388607 * time base |
| Minimum pulse width | 1 µs |
| Type of output | Push pull / highside |
Safety |
|
| Safety protocol | - |
| Safety requirements | - |
| Secure user address | - |
| Watchdog | - |
| Two channels | - |
| Test pulse length | - |
| Circuit monitoring | - |
Datasizes |
|
| Input bytes | 4 |
| Output bytes | 12 |
| Parameter bytes | 12 |
| Diagnostic bytes | 20 |
Housing |
|
| Material | PPE / PPE GF10 |
| Mounting | Profile rail 35 mm |
Mechanical data |
|
| Dimensions (WxHxD) | 12.9 mm x 109 mm x 76.5 mm |
| Weight | 60 g |
Environmental conditions |
|
| Operating temperature | 0 °C to 60 °C |
| Storage temperature | -25 °C to 70 °C |
Certifications |
|
| UL certification | yes |
| KC certification | yes |
[Datasheet]
