HMI > Line displays

603-1CC22 - Lines displays | Commander compact

Order no.

603-1CC22
TypeCC 03, Commander Compact

General information
Note-
FeaturesDisplay: 2 x 20 characters
Interface: MP²I
User memory: 128 kB
Languages: DE, EN, FR, ES, IT, SV, NO, DA
Project engineering via VIPA OP-Manager or Siemens ProTool
Integrated PLC-CPU: 24/32kByte work/load memory, 16 x DI, 16 x DO, up to 4 I/O expansion modules

Display
Number of rows2
Characters per row20
Character height5 mm
Type of displaySTN with LED backlighting

OP functionality
User memory128 KB
Number of variables4096
LanguageDE/EN/FR/ES/IT/SV/NO/DA

Operating controls
Touchscreen-
Mouse-
Number of system keys8
Number of soft keys5

Technical data power supply
Power supply (rated value)DC 24 V
Power supply (permitted range)DC 20.4...28.8 V
Reverse polarity protection
Current consumption (no-load operation)130 mA
Current consumption (rated value)1 A
Inrush current60 A
I²t0.35 A²s
Max. current drain at backplane bus0.8 A
Max. current drain load supply-
Power loss8 W
Reverse polarity protection

Technical data digital inputs
Number of inputs16
Cable length, shielded1000 m
Cable length, unshielded600 m
Rated load voltageDC 24 V
Reverse polarity protection of rated load voltage
Current consumption from load voltage L+ (without load)-
Rated valueDC 24 V
Input voltage for signal "0"DC 0...5 V
Input voltage for signal "1"DC 15...28.8 V
Input current for signal "1"7 mA
Connection of Two-Wire-BEROs possible
Max. permissible BERO quiescent current1.5 mA
Input delay of "0" to "1"3 ms
Input delay of "1" to "0"3 ms
Input characteristic curveIEC 61131-2, type 1
Initial data size2 Byte

Technical data digital outputs
Number of outputs16
Cable length, shielded1000 m
Cable length, unshielded600 m
Rated load voltageDC 24 V
Reverse polarity protection of rated load voltage-
Current consumption from load voltage L+ (without load)50 mA
Total current per group, horizontal configuration, 40°C4 A
Total current per group, horizontal configuration, 60°C4 A
Total current per group, vertical configuration4 A
Output voltage signal "1" at min. currentL+ (-125 mV)
Output voltage signal "1" at max. currentL+ (-0.8 V)
Output current at signal "1", rated value0.5 A
Output delay of "0" to "1"max. 100 µs
Output delay of "1" to "0"max. 350 µs
Minimum load current-
Lamp load5 W
Switching frequency with resistive loadmax. 1000 Hz
Switching frequency with inductive loadmax. 0.5 Hz
Switching frequency on lamp loadmax. 10 Hz
Internal limitation of inductive shut-off voltageL+ (-52 V)
Short-circuit protection of outputyes, electronic
Trigger level1 A
Output data size2 Byte

Technical data counters
Number of counters-
Counter width-
Maximum input frequency-
Maximum count frequency-
Mode incremental encoder-
Mode pulse / direction-
Mode pulse-
Mode frequency counter-
Mode period measurement-
Gate input available-
Latch input available-
Reset input available-
Counter output available-

Status information, alarms, diagnostics
Status displayyes
Interruptsno
Process alarmyes
Diagnostic interruptyes
Diagnostic functionsno
Diagnostics information read-outpossible
Supply voltage displaygreen LED
Group error displayred SF LED
Channel error displayred LED per group

Isolation
Between channels of groups to8
Between channels and backplane bus
Insulation tested withDC 500 V

Load and working memory
Load memory, integrated32 KB
Load memory, maximum32 KB
Work memory, integrated24 KB
Work memory, maximal24 KB
Memory divided in 50% program / 50% data-
Memory card slotMMC-Card with max. 512 MB

Hardware configuration
Racks, max.1
Modules per rack, max.4
Number of integrated DP master0
Number of DP master via CP4
Operable function modules4
Operable communication modules PtP4
Operable communication modules LAN-

Command processing times
Bit instructions, min.0.25 µs
Word instruction, min.1.2 µs
Double integer arithmetic, min.2.6 µs
Floating-point arithmetic, min.50 µs

Timers/Counters and their retentive characteristics
Number of S7 counters256
S7 counter remanenceadjustable 0 up to 64
S7 counter remanence adjustableC0 .. C7
Number of S7 times256
S7 times remanenceadjustable 0 up to 128
S7 times remanence adjustablenot retentive

Data range and retentive characteristic
Number of flags8192 Bit
Bit memories retentive characteristic adjustableadjustable 0 up to 256
Bit memories retentive characteristic presetMB0 .. MB15
Number of data blocks2047
Max. data blocks size16 KB
Number range DBs1 ... 2047
Max. local data size per execution level1024 Byte
Max. local data size per block1024 Byte

Blocks
Number of OBs14
Maximum OB size16 KB
Total number DBs, FBs, FCs-
Number of FBs1024
Maximum FB size16 KB
Number range FBs0 ... 1023
Number of FCs1024
Maximum FC size16 KB
Number range FCs0 ... 1023
Maximum nesting depth per priority class8
Maximum nesting depth additional within an error OB4

Time
Real-time clock buffered
Clock buffered period (min.)30 d
Type of bufferingVanadium Rechargeable Lithium Battery
Load time for 50% buffering period20 h
Load time for 100% buffering period48 h
Accuracy (max. deviation per day)10 s
Number of operating hours counter8
Clock synchronization-
Synchronization via MPIno
Synchronization via Ethernet (NTP)no

Address areas (I/O)
Input I/O address area1024 Bit
Output I/O address area1024 Bit
Process image adjustable-
Input process image preset128 Byte
Output process image preset128 Byte
Input process image maximal128 Byte
Output process image maximal128 Byte
Digital inputs8192
Digital outputs8192
Digital inputs central144
Digital outputs central144
Integrated digital inputs16
Integrated digital outputs16
Analog inputs512
Analog outputs512
Analog inputs, central32
Analog outputs, central16
Integrated analog inputs-
Integrated analog outputs-

Communication functions
PG/OP channel
Global data communication
Number of GD circuits, max.4
Size of GD packets, max.22 Byte
S7 basic communication
S7 basic communication, user data per job76 Byte
S7 communication
S7 communication as server
S7 communication as client-
S7 communication, user data per job160 Byte
Number of connections, max.16

Functionality Sub-D interfaces
TypeMP²I
Type of interfaceRS485
ConnectorSub-D, 9-pin, female
Electrically isolated-
MPI
MP²I (MPI/RS232)
DP master-
DP slave-
Point-to-point interface-
5V DC Power supplymax. 90mA, non-isolated
24V DC Power supplymax. 100mA, non-isolated

Type-
Type of interface-
Connector-
Electrically isolated-
MPI-
MP²I (MPI/RS232)-
DP master-
DP slave-
Point-to-point interface-
5V DC Power supply-
24V DC Power supply-

Functionality MPI
Number of connections, max.16
PG/OP channel
Routing-
Global data communication
S7 basic communication
S7 communication
S7 communication as server
S7 communication as client-
Transmission speed, min.19.2 kbit/s
Transmission speed, max.187.5 kbit/s

Functionality PROFIBUS slave
PG/OP channel-
Routing-
S7 communication-
S7 communication as server-
S7 communication as client-
Direct data exchange (slave-to-slave communication)-
DPV1-
Transmission speed, min.-
Transmission speed, max.-
Automatic detection of transmission speed-
Transfer memory inputs, max.-
Transfer memory outputs, max.-
Address areas, max.-
User data per address area, max.-

Mechanical data

Housing / Protection type
Materialdie-cast aluminum
Mountingvia integrated pivoted lever
Protect type front sideIP 65
Protect type back sideIP 20

Dimensions
Front panel187 mm x 90 mm x 6 mm
Rear panel154 mm x 77 mm x 55 mm

Installation cut-out
Width156 mm
Height78 mm
Minimum2.5 mm
Maximum front panel thickness6 mm
Weight580 g

Environmental conditions
Operating temperature0 °C to 60 °C
Storage temperature-20 °C to 70 °C

Certifications
UL certificationyes
KC certification-

Downloads

[Datasheet]
[Manual]
Rev. 15-04

HMI - operating and monitoring