300S > Signal modules analog
334-0KE00 - Signal modules analog | Analog in/output modules
Order no. |
334-0KE00 |
| Type | SM 334 |
General information |
|
| Note | - |
| Features | 4 inputs, 2 outputs Configurable Resistance Voltage 0...10 V |
| SPEED-Bus | - |
Current consumption/power loss |
|
| Current consumption from backplane bus | 95 mA |
| Power loss | 2 W |
Technical data analog inputs |
|
| Number of inputs | 4 |
| Cable length, shielded | 100 m |
| Rated load voltage | DC 24 V |
| Reverse polarity protection of rated load voltage | - |
| Current consumption from load voltage L+ (without load) | 40 mA |
| Voltage inputs |  |
| Min. input resistance (voltage range) | 100 kΩ |
| Input voltage ranges | 0 V ... +10 V |
| Operational limit of voltage ranges | +/-0.7% |
| Operational limit of voltage ranges with SFU | - |
| Basic error limit voltage ranges | +/-0.5% |
| Basic error limit voltage ranges with SFU | - |
| Destruction limit voltage | max. 30V |
| Current inputs | - |
| Max. input resistance (current range) | - |
| Input current ranges | - |
| Operational limit of current ranges | - |
| Operational limit of current ranges with SFU | - |
| Basic error limit current ranges | - |
| Radical error limit current ranges with SFU | - |
| Destruction limit current inputs (electrical current) | - |
| Destruction limit current inputs (voltage) | - |
| Resistance inputs | |
| Resistance ranges | 10000 Ohm |
| Operational limit of resistor ranges | +/-3.5% |
| Operational limit of resistor ranges with SFU | - |
| Basic error limit | +/-2.8% |
| Basic error limit with SFU | - |
| Destruction limit resistance inputs | max. 25V |
| Resistance thermometer inputs | |
| Resistance thermometer ranges | Pt100 |
| Operational limit of resistance thermometer ranges | +/-1.0% |
| Operational limit of resistance thermometer ranges with SFU | - |
| Basic error limit thermoresistor ranges | +/-0.8% |
| Basic error limit thermoresistor ranges with SFU | - |
| Destruction limit resistance thermometer inputs | max. 25V |
| Thermocouple inputs | - |
| Thermocouple ranges | - |
| Operational limit of thermocouple ranges | - |
| Operational limit of thermocouple ranges with SFU | - |
| Basic error limit thermoelement ranges | - |
| Basic error limit thermoelement ranges with SFU | - |
| Destruction limit thermocouple inputs | - |
| Programmable temperature compensation | - |
| External temperature compensation | - |
| Internal temperature compensation | - |
| Temperature error internal compensation | - |
| Technical unit of temperature measurement | °C |
| Resolution in bit | 12 |
| Measurement principle | Sigma-Delta |
| Basic conversion time | 350 ms |
| Noise suppression for frequency | 50 Hz/60 Hz |
| Initial data size | 8 Byte |
Technical data analog outputs |
|
| Number of outputs | 2 |
| Cable length, shielded | 100 m |
| Rated load voltage | DC 24 V |
| Reverse polarity protection of rated load voltage | |
| Current consumption from load voltage L+ (without load) | 40 mA |
| Voltage output short-circuit protection | |
| Voltage outputs | |
| Min. load resistance (voltage range) | 1 kΩ |
| Max. capacitive load (current range) | 1 µF |
| Max. inductive load (current range) | 25 mA |
| Output voltage ranges | 0 V ... +10 V |
| Operational limit of voltage ranges | +/-1% |
| Basic error limit voltage ranges | +/-0.8% |
| Destruction limit against external applied voltage | max. 16V (30V / 10s) |
| Current outputs | - |
| Max. in load resistance (current range) | - |
| Max. inductive load (current range) | - |
| Typ. open circuit voltage current output | - |
| Output current ranges | - |
| Operational limit of current ranges | - |
| Basic error limit current ranges | - |
| Destruction limit against external applied voltage | - |
| Settling time for ohmic load | 0.8 ms |
| Settling time for capacitive load | 0.8 ms |
| Settling time for inductive load | 0.3 ms |
| Resolution in bit | 12 |
| Conversion time | 0.5 ms per channel |
| Substitute value can be applied | - |
| Output data size | 4 Byte |
Status information, alarms, diagnostics |
|
| Status display | none |
| Interrupts | no |
| Process alarm | no |
| Diagnostic interrupt | no |
| Diagnostic functions | no |
| Diagnostics information read-out | none |
| Supply voltage display | none |
| Group error display | none |
| Channel error display | none |
Isolation |
|
| Between channels | - |
| Between channels of groups to | - |
| Between channels and backplane bus | |
| Between channels and power supply | |
| Max. potential difference between circuits | - |
| Max. potential difference between inputs (Ucm) | DC 1 V |
| Max. potential difference between Mana and Mintern (Uiso) | DC 75 V/ AC 50 V |
| Max. potential difference between inputs and Mana (Ucm) | DC 1 V |
| Max. potential difference between inputs and Mintern (Uiso) | - |
| Max. potential difference between Mintern and outputs | - |
| Insulation tested with | DC 500 V |
Datasizes |
|
| Input bytes | 8 |
| Output bytes | 4 |
| Parameter bytes | 21 |
| Diagnostic bytes | 0 |
Housing |
|
| Material | PPE |
| Mounting | Rail System 300 |
Mechanical data |
|
| Dimensions (WxHxD) | 40 mm x 125 mm x 120 mm |
| Weight | 210 g |
Environmental conditions |
|
| Operating temperature | 0 °C to 60 °C |
| Storage temperature | -25 °C to 70 °C |
Certifications |
|
| UL certification | yes |
| KC certification | yes |
[Datasheet]
