222-1DB00 - Signal modules digital | Digital output modules
Order no. |
222-1DB00 |
Type | SM 222 |
General information |
|
Note | - |
Features | 2 outputs AC 100...240 V Output current 2 A Software dimmer for resistive, inductive or capacitive load Frequency range 47...63 Hz |
Current consumption/power loss |
|
Current consumption from backplane bus | 190 mA |
Power loss | 6 W |
Technical data digital outputs |
|
Number of outputs | 2 |
Cable length, shielded | 1000 m |
Cable length, unshielded | 600 m |
Rated load voltage | AC 100...240 V |
Current consumption from load voltage L+ (without load) | 15 mA |
Total current per group, horizontal configuration, 40°C | 4 A |
Total current per group, horizontal configuration, 60°C | 3 A |
Total current per group, vertical configuration | 4 A |
Output current at signal "1", rated value | 2 A |
Output delay of "0" to "1" | max. 1 AC cycle |
Output delay of "1" to "0" | max. 1 AC cycle |
Minimum load current | - |
Lamp load | 460 W |
Parallel switching of outputs for redundant control of a load | not possible |
Parallel switching of outputs for increased power | not possible |
Actuation of digital input | - |
Switching frequency with resistive load | - |
Switching frequency with inductive load | - |
Switching frequency on lamp load | - |
Internal limitation of inductive shut-off voltage | - |
Short-circuit protection of output | yes, electronic |
Trigger level | 4 A |
Number of operating cycle of relay outputs | - |
Switching capacity of contacts | - |
Output data size | 4 Byte |
Status information, alarms, diagnostics |
|
Status display | none |
Interrupts | no |
Process alarm | no |
Diagnostic interrupt | yes, parameterizable |
Diagnostic functions | no |
Diagnostics information read-out | possible |
Supply voltage display | green LED per group |
Group error display | red SF LED |
Channel error display | none |
Isolation |
|
Between channels | - |
Between channels of groups to | - |
Between channels and backplane bus | |
Insulation tested with | DC 4000 V |
Datasizes |
|
Input bytes | 0 |
Output bytes | 4 |
Parameter bytes | 17 |
Diagnostic bytes | 10 |
Housing |
|
Material | PPE / PA 6.6 |
Mounting | Profile rail 35 mm |
Mechanical data |
|
Dimensions (WxHxD) | 25.4 mm x 76 mm x 88 mm |
Weight | 70 g |
Environmental conditions |
|
Operating temperature | 0 °C to 60 °C |
Storage temperature | -25 °C to 70 °C |
Certifications |
|
UL certification | - |
KC certification | - |