231-1BD53 - Signal modules analog | Analog input modules
Order no. |
231-1BD53 |
Type | SM 231 |
General information |
|
Note | - |
Features | 4 inputs Configurable Voltage, current Resistance Resistance thermometer, thermocouple |
Current consumption/power loss |
|
Current consumption from backplane bus | 280 mA |
Power loss | 1.4 W |
Technical data analog inputs |
|
Number of inputs | 4 |
Cable length, shielded | 200 m |
Rated load voltage | - |
Current consumption from load voltage L+ (without load) | - |
Voltage inputs | |
Min. input resistance (voltage range) | 20 MΩ |
Input voltage ranges | -50 mV ... +50 mV -400 mV ... +400 mV -4 V ... +4 V -10 V ... +10 V |
Operational limit of voltage ranges | +/-0.3% ... +/-0.6% |
Operational limit of voltage ranges with SFU | - |
Basic error limit voltage ranges | +/-0.2% ... +/-0.4% |
Basic error limit voltage ranges with SFU | - |
Destruction limit voltage | max. 15V |
Current inputs | |
Max. input resistance (current range) | 85 Ω |
Input current ranges | -20 mA ... +20 mA 0 mA ... +20 mA +4 mA ... +20 mA |
Operational limit of current ranges | +/-0.3% ... +/-0.8% |
Operational limit of current ranges with SFU | - |
Grundfehlergrenze Strombereiche | +/-0.2% ... +/-0.5% |
Radical error limit current ranges with SFU | - |
Destruction limit current inputs (electrical current) | max. 30mA |
Destruction limit current inputs (voltage) | - |
Resistance inputs | |
Resistance ranges | 0 ... 60 Ohm 0 ... 600 Ohm 0 ... 3000 Ohm 0 ... 6000 Ohm |
Operational limit of resistor ranges | +/-0.4% ... +/-0.8% |
Operational limit of resistor ranges with SFU | - |
Basic error limit | +/-0.2% ... +/-0.4% |
Basic error limit with SFU | - |
Destruction limit resistance inputs | max. 15V |
Resistance thermometer inputs | |
Resistance thermometer ranges | Pt100, Pt1000 KTY81-152 Ni100, Ni1000 Cu50 KTY81-110 KTY81-120 KTY81-121 KTY81-122 KTY81-150 KTY81-151 |
Operational limit of resistance thermometer ranges | +/-0.4% ... +/-1.4% |
Operational limit of resistance thermometer ranges with SFU | - |
Basic error limit thermoresistor ranges | +/-0.2% ... +/-0.7% |
Basic error limit thermoresistor ranges with SFU | - |
Destruction limit resistance thermometer inputs | max. 15V |
Thermocouple inputs | |
Thermocouple ranges | type J type K type N type R type S type E type T |
Operational limit of thermocouple ranges | +/-1.5% |
Operational limit of thermocouple ranges with SFU | - |
Basic error limit thermoelement ranges | +/-1.0% |
Basic error limit thermoelement ranges with SFU | - |
Destruction limit thermocouple inputs | max. 15V |
Programmable temperature compensation | |
External temperature compensation | |
Internal temperature compensation | |
Temperature error internal compensation | 5 K |
Technical unit of temperature measurement | °C |
Resolution in bit | 16 |
Measurement principle | Sigma-Delta |
Basic conversion time | 7 ms ... 272 ms |
Noise suppression for frequency | none |
Initial data size | 8 Byte |
Status information, alarms, diagnostics |
|
Status display | none |
Interrupts | yes |
Process alarm | no |
Diagnostic interrupt | yes, parameterizable |
Diagnostic functions | yes |
Diagnostics information read-out | possible |
Supply voltage display | none |
Group error display | none |
Channel error display | red LED per channel |
Isolation |
|
Between channels | - |
Between channels of groups to | - |
Between channels and backplane bus | |
Between channels and power supply | - |
Max. potential difference between circuits | - |
Max. potential difference between inputs (Ucm) | DC 4 V |
Max. potential difference between Mana and Mintern (Uiso) | - |
Max. potential difference between inputs and Mana (Ucm) | - |
Max. potential difference between inputs and Mintern (Uiso) | DC 75 V/ AC 50 V |
Max. potential difference between Mintern and outputs | - |
Insulation tested with | DC 500 V |
Datasizes |
|
Input bytes | 8 |
Output bytes | 0 |
Parameter bytes | 12 |
Diagnostic bytes | 12 |
Housing |
|
Material | PPE / PA 6.6 |
Mounting | Profile rail 35 mm |
Mechanical data |
|
Dimensions (WxHxD) | 25.4 mm x 76 mm x 88 mm |
Weight | 100 g |
Environmental conditions |
|
Operating temperature | 0 °C to 60 °C |
Storage temperature | -25 °C to 70 °C |
Certifications |
|
UL certification | yes |
KC certification | - |