232-1BD30 - Signal modules analog | Analog output modules
Order no. |
232-1BD30 |
Type | SM 232, ECO |
General information |
|
Note | - |
Features | 4 outputs Configurable Voltage +/-10 V, 0..10 V |
Current consumption/power loss |
|
Current consumption from backplane bus | 60 mA |
Power loss | 2.7 W |
Technical data analog outputs |
|
Number of outputs | 4 |
Cable length, shielded | 200 m |
Rated load voltage | DC 24 V |
Reverse polarity protection of rated load voltage | |
Current consumption from load voltage L+ (without load) | 100 mA |
Voltage output short-circuit protection | |
Voltage outputs | |
Min. load resistance (voltage range) | 5 kΩ |
Max. capacitive load (current range) | 1 µF |
Max. inductive load (current range) | 7 mA |
Output voltage ranges | -10 V ... +10 V 0 V ... +10 V |
Operational limit of voltage ranges | +/-0.4% |
Basic error limit voltage ranges | +/-0.2% |
Destruction limit against external applied voltage | max. 15V |
Current outputs | - |
Max. in load resistance (current range) | - |
Max. inductive load (current range) | - |
Typ. open circuit voltage current output | - |
Output current ranges | - |
Operational limit of current ranges | - |
Basic error limit current ranges | - |
Destruction limit against external applied voltage | - |
Settling time for ohmic load | 1.5 ms |
Settling time for capacitive load | 3 ms |
Settling time for inductive load | - |
Resolution in bit | 12 |
Conversion time | 0.7 ms / all channels |
Substitute value can be applied | no |
Output data size | 8 Byte |
Status information, alarms, diagnostics |
|
Status display | none |
Interrupts | no |
Process alarm | no |
Diagnostic interrupt | no |
Diagnostic functions | no |
Diagnostics information read-out | none |
Supply voltage display | green LED |
Group error display | none |
Channel error display | none |
Isolation |
|
Between channels | - |
Between channels of groups to | - |
Between channels and backplane bus | |
Between channels and power supply | |
Max. potential difference between circuits | - |
Max. potential difference between inputs (Ucm) | - |
Max. potential difference between Mana and Mintern (Uiso) | DC 75 V/ AC 50 V |
Max. potential difference between inputs and Mana (Ucm) | - |
Max. potential difference between inputs and Mintern (Uiso) | - |
Max. potential difference between Mintern and outputs | - |
Insulation tested with | DC 500 V |
Datasizes |
|
Input bytes | 0 |
Output bytes | 8 |
Parameter bytes | 8 |
Diagnostic bytes | 0 |
Housing |
|
Material | PPE / PA 6.6 |
Mounting | Profile rail 35 mm |
Mechanical data |
|
Dimensions (WxHxD) | 25.4 mm x 76 mm x 88 mm |
Weight | 80 g |
Environmental conditions |
|
Operating temperature | 0 °C to 60 °C |
Storage temperature | -25 °C to 70 °C |
Certifications |
|
UL certification | yes |
KC certification | - |