200V > Interface modules

253-1DP31 - Interface modules | Fieldbus slave modules without I/Os

Order no.

253-1DP31

TypeIM 253DP, PROFIBUS-DP slave

General information

Note-
FeaturesPROFIBUS-DP slave (RS485, DP-V0, DP-V1)
For max. 8 peripheral modules
244 Byte input and 244 Byte output data

Technical data power supply

Power supply (rated value)DC 24 V
Power supply (permitted range)DC 20.4...28.8 V
Reverse polarity protection
Current consumption (no-load operation)50 mA
Current consumption (rated value)300 mA
Inrush current60 A
I²t0.4 A²s
Max. current drain at backplane bus0.8 A
Max. current drain load supply-
Power loss1.5 W

Status information, alarms, diagnostics

Status displayyes
Interruptsyes, parameterizable
Process alarmyes, parameterizable
Diagnostic interruptyes, parameterizable
Diagnostic functionsyes, parameterizable
Diagnostics information read-outpossible
Supply voltage displaygreen LED
Service Indicator-
Group error displayred SF LED
Channel error displaynone

Hardware configuration

Racks, max.1
Modules per rack, max.8
Number of digital modules, max.8
Number of analog modules, max.8

Communication

FieldbusPROFIBUS-DP to EN 50170
Type of interfaceRS485
ConnectorSub-D, 9-pin, female
TopologyLinear bus with bus termination at both ends
Electrically isolated
Number of participants, max.125
Node addresses1 - 125
Transmission speed, min.9.6 kbit/s
Transmission speed, max.12 Mbit/s
Address range inputs, max.244 Byte
Address range outputs, max.244 Byte
Number of TxPDOs, max.-
Number of RxPDOs, max.-

Housing

MaterialPPE / PA 6.6
MountingProfile rail 35 mm

Mechanical data

Dimensions (WxHxD)25.4 mm x 76 mm x 78 mm
Weight90 g

Environmental conditions

Operating temperature0 °C to 60 °C
Storage temperature-25 °C to 70 °C

Certifications

UL certificationyes
KC certification-

Downloads

[Datasheet]
[Manual]