200V > Interface modules

253-1DN00 - Interface modules | Fieldbus slave modules without I/Os

Order no.

253-1DN00
TypeIM 253DN, DeviceNET slave

General information
Note-
FeaturesGroup 2 only Device - employs predefined connection set
Baud rates: 125, 250, 500 kBit/s
For max. 32 peripheral modules (8 analog)

Technical data power supply
Power supply (rated value)DC 24 V
Power supply (permitted range)DC 20.4...28.8 V
Reverse polarity protection
Current consumption (no-load operation)50 mA
Current consumption (rated value)800 mA
Inrush current65 A
I²t0.85 A²s
Max. current drain at backplane bus3.5 A
Max. current drain load supply-
Power loss2 W

Status information, alarms, diagnostics
Status displayyes
Interruptsno
Process alarmno
Diagnostic interruptno
Diagnostic functionsyes
Diagnostics information read-outnone
Supply voltage displayyes
Service Indicator-
Group error displayyes
Channel error displaynone

Hardware configuration
Racks, max.1
Modules per rack, max.32
Number of digital modules, max.32
Number of analog modules, max.8

Communication
FieldbusDeviceNet
Type of interfaceCAN
Connector5-pin Open Style Connector
TopologyLinear bus with bus termination at both ends
Electrically isolated
Number of participants, max.64
Node addresses0 - 63
Transmission speed, min.125 kbit/s
Transmission speed, max.500 kbit/s
Address range inputs, max.256 Byte
Address range outputs, max.256 Byte
Number of TxPDOs, max.-
Number of RxPDOs, max.-

Housing
MaterialPPE / PA 6.6
MountingProfile rail 35 mm

Mechanical data
Dimensions (WxHxD)25.4 mm x 76 mm x 78 mm
Weight90 g

Environmental conditions
Operating temperature0 °C to 60 °C
Storage temperature-25 °C to 70 °C

Certifications
UL certificationyes
KC certification-

Downloads

[Datasheet]
[Manual]
Rev. 12-44