200V > Interface modules
253-1DN00 - Interface modules | Fieldbus slave modules without I/Os
Order no. |
253-1DN00 |
Type | IM 253DN, DeviceNET slave |
General information |
|
Note | - |
Features | Group 2 only Device - employs predefined connection set Baud rates: 125, 250, 500 kBit/s For max. 32 peripheral modules (8 analog) |
Technical data power supply |
|
Power supply (rated value) | DC 24 V |
Power supply (permitted range) | DC 20.4...28.8 V |
Reverse polarity protection | |
Current consumption (no-load operation) | 50 mA |
Current consumption (rated value) | 800 mA |
Inrush current | 65 A |
I²t | 0.85 A²s |
Max. current drain at backplane bus | 3.5 A |
Max. current drain load supply | - |
Power loss | 2 W |
Status information, alarms, diagnostics |
|
Status display | yes |
Interrupts | no |
Process alarm | no |
Diagnostic interrupt | no |
Diagnostic functions | yes |
Diagnostics information read-out | none |
Supply voltage display | yes |
Service Indicator | - |
Group error display | yes |
Channel error display | none |
Hardware configuration |
|
Racks, max. | 1 |
Modules per rack, max. | 32 |
Number of digital modules, max. | 32 |
Number of analog modules, max. | 8 |
Communication |
|
Fieldbus | DeviceNet |
Type of interface | CAN |
Connector | 5-pin Open Style Connector |
Topology | Linear bus with bus termination at both ends |
Electrically isolated | |
Number of participants, max. | 64 |
Node addresses | 0 - 63 |
Transmission speed, min. | 125 kbit/s |
Transmission speed, max. | 500 kbit/s |
Address range inputs, max. | 256 Byte |
Address range outputs, max. | 256 Byte |
Number of TxPDOs, max. | - |
Number of RxPDOs, max. | - |
Housing |
|
Material | PPE / PA 6.6 |
Mounting | Profile rail 35 mm |
Mechanical data |
|
Dimensions (WxHxD) | 25.4 mm x 76 mm x 78 mm |
Weight | 90 g |
Environmental conditions |
|
Operating temperature | 0 °C to 60 °C |
Storage temperature | -25 °C to 70 °C |
Certifications |
|
UL certification | yes |
KC certification | - |